Unlock Bios Password LENOVO E580 - BIOS PASSWORD

[roli1980]

hi can anyone remove this password ?
thanks

 

[Salimeh Bolboli]

Please send the motherboard model.

 

[Ali Shaikh]

[ HOW TO USE THE PATCH ]
STEP 1: Flash and replace current BIOS with the generated patch file
STEP 2: Boot the machine
STEP 3: Press ENTER/F1/etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Restore original BIOS
STEP 9: Reset BIOS settings to factory default

[ NOTES ]
When booting the patched BIOS you might have to:

• Hold the anti-tamper switch down the whole time (use tape)
• Remove the hard disk or replace it with a locked one

 

[roli1980]

[ HOW TO USE THE PATCH ]
STEP 1: Flash and replace current BIOS with the generated patch file
STEP 2: Boot the machine
STEP 3: Press ENTER/F1/etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Restore original BIOS
STEP 9: Reset BIOS settings to factory default

[ NOTES ]
When booting the patched BIOS you might have to:

• Hold the anti-tamper switch down the whole time (use tape)
• Remove the hard disk or replace it with a locked one

only info i can find on the board is this , thanks

 

[Vahab Hemmati]

Unlock Bios Password - LENOVO E580 - BIOS PASSWORD

hi can anyone remove this password ? thanks

dr-bios.com

 

[roli1980]

[ HOW TO USE THE PATCH ]
STEP 1: Flash and replace current BIOS with the generated patch file
STEP 2: Boot the machine
STEP 3: Press ENTER/F1/etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Restore original BIOS
STEP 9: Reset BIOS settings to factory default

[ NOTES ]
When booting the patched BIOS you might have to:

• Hold the anti-tamper switch down the whole time (use tape)
• Remove the hard disk or replace it with a locked one

is this patch generic to use on same models ?

 

[Vahab Hemmati]

is this patch generic to use on same models ?

yes

 

[roli1980]

yes

I currently have another x10 of these E580 and tried to flash that patch to this one , and does not boot ?

 

[roli1980]

I currently have another x10 of these E580 and tried to flash that patch to this one , and does not boot ?

an

yes

I currently have another x10 of these E580 and tried to flash that patch to this one , and does not boot ?

 

[roli1980]

hi any clarification on this plz ?

 

[Ali Shaikh]

you need to (program sio) ec bios

 

[roli1980]

you need to (program sio) ec bios

so the patched file above worked on that one
do i need to post the 10 bios(s) to get them individual patched

 

[Salimeh Bolboli]

so the patched file above worked on that one
do i need to post the 10 bios(s) to get them individual patched

Yes, you can send them all.

 

[roli1980]

hi can you patch this please , thanks

 

[roli1980]

hi can you patch this please , thanks

Any help plz

 

[roli1980]

Yes, you can send them all.

I’m a little confused as to why I buy a subscription, and pay for help , yet no one seems to respond

 

[Ali Shaikh]

HOW TO USE THE PATCH ]
STEP 1: Flash and replace current BIOS with the generated patch file
STEP 2: Boot the machine
STEP 3: Press ENTER/F1/etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Restore original BIOS
STEP 9: Reset BIOS settings to factory default

[ NOTES ]
When booting the patched BIOS you might have to:

• Hold the anti-tamper switch down the whole time (use tape)
• Remove the hard disk or replace it with a locked one

 

[roli1980]

HOW TO USE THE PATCH ]
STEP 1: Flash and replace current BIOS with the generated patch file
STEP 2: Boot the machine
STEP 3: Press ENTER/F1/etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Restore original BIOS
STEP 9: Reset BIOS settings to factory default

[ NOTES ]
When booting the patched BIOS you might have to:

• Hold the anti-tamper switch down the whole time (use tape)
• Remove the hard disk or replace it with a locked one

can you also do this please

 

[roli1980]

can you also do this please

@Ali Shaikh - any help

 

[Ali Shaikh]

@Ali Shaikh - any help

 

[roli1980]

Could you do this last one please ,thanks so much

 

[roli1980]

Could you do this last one please ,thanks so much

@Ali Shaikh

 

[roli1980]

@Ali Shaikh

its ok , i have it sorted now .

 

[Vahab Hemmati]

 

[biniu1978]

Hi. Can you patch my bios please. Thank you